OPM-50 Intelligent Optical Power Meter with automatic wavelength identification, Remote reference value setting, compatible with FTTx tests.
Compatible with the digital encryption protocols of SLS-50, OPM-50 can automatically identify the wavelength of the optical signals transmitted from SLS-50 and switch to the corresponding test mode, which greatly reduces the workload at both ends and avoids potential error.
OPM-50 can receive the power parameters of digital-encrypted signal transmitted from SLS-50 as reference for precise link loss measurement even the two units are far apart.
Internal clock enables OPM-50 to save test data with time and editable fiber SN information.
OPM-50 can be applied to measure Triple-play signals (1310nm, 1490nm and 1550nm) on Passive Optical Network (PON).
Automatic wavelength identification
Remote reference value setting
FTTx applicable
Internal clock & fiber S/N editable
Memory of 1000 test records
Data Transfer to PC via USB
USB power charging
No warm-up, quick start
Backlight
70 hours continuous operation
Pocketsize, lightweight and easy-to-use
CE FCC certificates
OPM-50 paired with SLS-50 Intelligent Stabilized Laser Source can be used to identify fiber, measure attenuation and loss, verify continuity and evaluate fiber link transmission quality.
Model
OPM-50
Calibrated Wavelength(1)
850,1300,1310,1490,1550,1625nm
Power Range (dBm)(2)
-70 ~ +10(1)
-50 ~ +27
Fiber Type
Singlemode/Multimode fibers
Detector Type
InGaAs
Accuracy
±5% ±0.01nW (±0.5dB@850nm)
±5% ±1nW (±0.5dB@850nm)
Resolution (dB)
0.01
MOD Identification
270, 1K, 2K Hz
Auto Wavelength Identification
Yes (With SLS-50)
Display Unit
W/mW/?W/nW/pW/dBm/dB(REF)
Data Storage
1000 records
Connectivity
USB
Connector(3)
FC (Interchangeable SC/ST)
Power Supply
Lithium Battery/ AC Adapter
Battery Life
Continuous operation: 70 hours, Standby: 140 hours
Power Saving
Auto-off after 5 minutes idle
Operating Temperature
0?C ~ 50?C (32 ~ 122 F)
Storage Temperature
-20?C ~ 70?C (-4 ~ 158 F )
Relative Humidity
0 ~ 95% (Non-condensing)
Weight
315g (0.69 lbs)
Dimensions (H × W × T)
177×80×44mm (6.97×3.15×1.73 inch)
Note: (1) Other wavelengths are open for customization;
(2) For Model A at 850nm, the lower limit of measurement range is -60dBm (Model A) / -40dBm (Model B);
(3) OPM models with Ф1000μm detector are available with: FC/SC/ST/DIN/E2000/LC/Universal
1.25mm/Universal 2.5mm connectors.
* Specifications subject to change without notice
Download:
Datasheet: PDF