5 Ports Full Gigabit PoE Switch, extend distance 300

  • 4*10/100/1000M + 1*100/1000M RJ45 Port PoE Switch,1-4 ports support IEEE802.3af/at;;
  • Support AI Watchdog, Port self-healing, VLAN, extend 300meter distance, Auto Speed Change, Priority port & reduce the after-sale
  • The Power supply is 65W;
  • Model: TS-SG1204P-250M

Product Description

5 Ports Full Gigabit PoE Switch   with extend 300meter distance                                                        Datasheet

Model: TS-SG1204P-250M

  • 4*10/100/1000M + 1*100/1000M RJ45 Port PoE Switch,1-4 ports support IEEE802.3af/at;
  • Comply with IEEE 802.3, IEEE 802.3u , IEEE 802.3ab standards;
  • PoE port support AF/AT intelligent recognition. Standard power is 15.4W/port, Maximum power: 30W/port;
  • Support AI Watchdog, Port self-healing, VLAN, extend 300meter distance, Auto Speed Change, Priority port & reduce the after-sale;
  • Supports POE devices such as wireless access points (APs) and network surveillance cameras through Category 5/6 Ethernet cables;
  • The Power supply is 65W;
Model TS-SG1204P-250M
Fixed Port

4*10/100/1000Base-T/TX PoE ports (Data/Power)

1*10/100/1000Base-T/TX Uplink RJ45 ports (Data)

POE Port Port 1-4 support PoE
Feature

With the Dial code switch, support port priority by default.

E: AI Extend 300meters transmission and auto speed change of single port (limit 10Mbps), other ports maintain 100M/1000M within 100 meters;

V: Turn on, 1-4 Port support each port Isolation & VLAN;

D: Turn on, 1-4 Port support AI-PoE Network self-healing mode (PoE Watchdog function), Automatic solve the camera problem &reduce after-sale.

Network Protocol

IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;

IEEE802.3u 100Base-TX;

IEEE802.3ab 1000Base-T;

IEEE802.3x

Ethernet Port Feature 10/100Base–T(X) 10/100/1000 Base-T automatic detection, full/half Duplex MDI/MDI-X adaptive
Fiber Port Feature Store and Forward
Switching capacity 10Gbps
Buffer Memory 1M
MAC 4K
Forwarding Mode 7.44Mpps
Twisted Pair Transmission

10BASE-T: Cat5 UTP (≤300 meter)

100BASE-TX: Cat5 or later UTP (≤100 meter)

1000BASE-T: Cat5 or later UTP (≤100 meter)

Power Supply Pin Default 1/2(+), 3/6(-);
MAX / AVERAGE Power Per Port 30W/15.4W
Total PWR / Input Voltage 65W
Power Consumption Standby:<2W; Full load:<65W
LED Indicator

Power indicator: PWR (Green);

Network indicator: 1-4(Link/Act)/ (Green),5(Link/Act)/ (Green)

Power Supply Build-in power adaptor AC100~240V 50-60Hz,65W
Operation TEMP / Humidity -20~+55°C:5%~90% RH non condensing
Storage TEMP / Humidity -40~+75°C;5%~95% RH non condensing
Dimension 195*130*40mm
Net /Gross Weight <0.75kg / <1kg
Installation Method desktop type, wall mounted
Protection

IEC61000-4-2(ESD): ±8kV contact discharge, ±15kV air discharge

IEC61000-4-5(Lightning protection/Surge): Power:CM±4kV/DM±2kV; Port: ±4kV

Protection Level IP30
Certification CCC; CE mark, commercial;CE/LVD EN60950; FCC Part 15 Class B;RoHS