Armoire Serveur 42U 19″ 800 x 1000- avec porte perforée.
FR:
Design special: le cadre peut être monté avec 8 vis seulement. le rack permet une haute intensité, la charge statique max est de 1300kg.
les deux portes avant et arrière sont avec verrouillage à deux points. sans pour autant laisser du vide entre le cadre et la porte.
Avec une porte avant permettant une ventilation haute densité, une porte arrière double section avec un angle d'ouverture de 180°, le taux de ventilation ventilation peut atteindre 70%.
EN:
Special Design: Frame could be connected by 8 pieces of screws. Cabinet is with very high intensity, maximum static loading capacity is up to 1300kgs.
Both front and rear doors are with two-point locking design, therefore doors and frames fit tight. High-density vented front door and double section rear door, with turning angle up to 180 de- grees, ventilation rate is up to 70%.
Latest out looking design: double section side panels; pluggable front door, rear door and external hinges; embedded castors
Sliding and adjustable cable entries at top and bottom, edges of the cable entries are with the design to prevent cute
Fan units are installed from outside of cabinets, easy to install and
Internal cabinets reserve the dedicated channel
Installation positions of mounting rails could be adjusted
Material: SPCC cold rolled steel and Galvanized sheet
Thickness: Mounting rails and castors pallets: 2.0mm; cabinet top crossbeam: 1.5mm; cable management panel: 1.0mm; others: 1.2mm
Surface finishing: Mounting rails: zinc plated; others: powder coated
Static loading capacity: 1300kgs
Standards: Comply with ANSI/EIA RS-310-D, IEC60297-2, DIN41494, PART1, DIN41494, PART7, Compatible with 19” International Standards, ETSI
Color: Black Ral9004, Gray Ral7035, Black Ral702119” standard installation structure (patent).
Width: 600/800mm;
Depth: 600/800/900/1000mm
Capacity: 24/42UMaterial: SPCC cold rolled steel and Galvanized sheet
SPCC t1.2
Powder coated
SPCC t1.5
4pcs for 24U
Galvanized t2.0
Zinc plated
Castor pallets
Cable management panels
Front Door: Lockable mesh door
Rear Door: Lockable double section mesh door
Side Panel: Lockable split side panels
19” Standard Installation Structure (Patent)
Doors: Both front and rear doors are with two-point locking design, therefore doors and frames fit tight. High-density vented front door and double section rear door, with turning angle up to 180 degrees, ventilation rate is up to 70%.
Latest Out Looking Design: Double section side panels; pluggable front door, rear door and external hinges; embedded castors design.
Cable Entry: Sliding and adjustable cable entries at top and bottom, edges of the cable entries are with the design to prevent cute wires.
Cooling System: Fan units are install from outside of cabinets, easy to install and maintain.
Internal cabinets reserve the dedicated channel alignment.
Installation positions of mounting rails could be adjusted quickly.
Thickness: Mounting rails and castors pallets: 2.0mm; cabinet top crossbeam: 5mm; cable management panel: 1.0mm; others: 1.2mm
IP degree: IP20
Mesh door
Toughened glass door
Double section mesh door
Solid plate door
ANSI/EIA RS-310-D; IEC60297-2; DIN41494, PART1; DIN41494, PART7;
Compatible with 19” International Standards, ETS
TS-42U8001000P: PDF